Parameter
|
Standard
|
Special**
|
Resistivity Range
|
10 ohm - megohm
|
1 ohm - 1 Gigohm
|
Tolerance
|
|
|
Untrimmed
|
±20%
|
±10%
|
Trimmed
|
±1%
|
±0.25%
|
TCR - Absolute
|
±100 ppm/C
|
±50 ppm/C
|
TCR - Tracking
|
±50 ppm/C
|
±25 ppm/C
|
Resistance Ratio
|
±1%
|
±.5%
|
Power Dissipation
|
50 watts/sq. in.
|
200 watts/sq. in.
|
It is cost effective to use standard resistor characteristics wherever possible.
Resistors can be printed on both sides of a substrate.
Printed on top of multilayer dielectrics.
Trimmed to any value using computer-controlled laser trimming systems. Resistors can also be ratio-trimmed.
*Temperature Range: -55C to + 125C
** Technically feasible within the specific guidelines of the material used.
|